Sports field, playground fall protection rubber sheet in black, green, red 60 mm thick 1000x1000 mm square split pattern rubber covering HIC=2.0 m

Playground impact absorbing rubber sheet

When choosing from our product range in the case of public/institutional playground application, it must be taken into account that the critical fall height (HIC) of the rubber covering is the same as the free fall height of the playground device ( according to MSZ EN 1176-1) or greater. Our products have a certificate of conformity according to the MSZ EN 1177:2008 standard, the HIC values ​​are valid when installed on a concrete base! The rubber coverings are tested by TÜV Rheinland Hungária Kft. and TÜV SÜD KERMI Kft. done.

The lower part of the "A" type 100x100cm rubber tiles has a drainage cushion design. Rivet and half elements are not available, as the rubber cover can easily be cut to size with a hand saw.

The product is available with a 50x50cm split top pattern, thus providing a traditional visual effect on playgrounds!

This rubber covering product is not UV stable, its color gradually darkens under strong sunlight, but its other properties do not change. If this is a problem, we recommend using colored UV-stable EPDM rubber sheets instead!

Traditional rubber coverings are not UV stable, their color gradually darkens under the influence of strong sunlight, but their other properties do not change. If this is a problem, we recommend the use of colored UV-stable EPDM MIX AND EPDM MIX + rubber sheets instead!

EPDM MIX colors contain 20% of colored rubber granules, EPDM MIX + colors contain 50% of colored rubber granules.

Only black, red and green can be ordered in the traditional version.

In EPDM MIX and EPDM MIX + types, only the scattered versions can be ordered.

Request an offer for our EPDM MIX + product!

HIC protection height m : 2.00