Sports field, playground fall protection rubber sheet with split pattern in size 40X500X500mm, several colors and quality

Soft, flexible rubber cover

When choosing from our product range for public/institutional playground applications, it must be taken into account that the critical fall height (HIC) of the rubber covering is the same as the free fall height of the playground device (according to MSZ EN 1176-1) or greater. Our products have a certificate of conformity according to the MSZ EN 1177:2008 standard, the HIC values ​​are valid when installed on a concrete base!

The inspection of the rubber covers is carried out by TÜV Rheinland Hungária Kft. and TÜV SÜD KERMI Kft. done.

Rivet and half elements are not available, as the rubber cover can easily be cut to size with a hand saw. Our "B3" type 45mm rubber sheet products have two layers. The upper part is wear-resistant, and the lower layer has a flexible structure and cleat design, thanks to which there are drainage channels in it, which ensure a stronger fit with the substructure.

In order to prevent the rubber sheets from moving, two sides (in the case of a separate order) are provided with 4 - 4 holes with a diameter of 6 mm. They can be connected with the plastic connecting pins that can be ordered (not included in the purchase price), or by row shifting. The attached figure shows their correct form of deposition.

Traditional rubber coverings are not UV stable, their color gradually darkens under the influence of strong sunlight, but their other properties do not change. If this is a problem, we recommend the use of colored UV-stable EPDM MIX AND EPDM MIX + rubber sheets instead!

EPDM MIX colors contain 20% of colored rubber granules, EPDM MIX + colors contain 50% of colored rubber granules.

Request an offer for our EPDM MIX + product!

Only black, red and green can be ordered in the traditional version.

In EPDM MIX and EPDM MIX + types, only the scattered versions can be ordered.

HIC protection height m : 1.30